The Model 642M centrifuge is designed for the Home Health Nurse that is on-the-go. Powered by a vehicle’s 12V electrical supply, the 642M is designed to provide the ideal pre-analytic horizontal-sample-processing recommended by all blood collection tube manufacturers. Using patented technologies, the 642M reduces blood separation times by 33%, leaving more time to travel to the next appointment and less time waiting for completion of the centrifuge cycle. The unmatched performance of the 642M maximizes sample integrity by keeping your patient samples cool during centrifugation and by providing a high-quality gel separation layer.

Features

• Powered directly from a vehicle’s 12V electrical supply
• Preset speed and runtime for consistent processing
• Simple two-button controls ensure maximum repeatability
• Electronic Timer – Preset to 10 minutes for ideal gel separations; selectable from 1 to 30 minutes for general purpose use
• Capacity – Up to six (6) 17 mm x 100 mm tubes
• Tube Sizes – 3 mL to 10 mL: up to 17 mm x 100 mm
• 12 Volt DC Motor – Years of operation with no routine maintenance
• Quiet Operation with Low Vibration – A double-encased motor assures quiet performance and low out-of-balance vibration
• Cool Operation – Unique design of the convection based cooling system protects the samples even under the heaviest workloads
• Footprint – Compact design uses approximately 1 sq. ft. of counter space
• 6 Foot Cord – Easily reaches the rear of your vehicle
• Automatic Lid Lock – Centrifuge will not run with the lid open and the lid cannot be opened while samples are spinning
• Positive Lid Latching – Firm mechanical latching of the lid prevents the escape of debris
• Clear Shatter Proof Lid – Allows for safe sample observation and optical calibrations
• Reinforced Guard Bowl – Provides maximum safety and durability

Specifications

• Height – 8.75 in. (22 cm)
• Width – 11.75 in. (30 cm)
• Depth – 14.0 in. (35.5 cm)
• Weight – 12 lbs. (5.4 kg)
• Capacity - 6 x 75-100 mm (3-10 mL)
• Max. Acceleration Time – 10 Seconds
• Max. Deceleration Time – 20 Seconds
• Timer – Electronic, Programmable from 1 to 30 Minutes; Preset to 10 Minutes
• Voltage – 12 Volts DC
• Max. Power Requirements – 100 Watts
• Protection Breaker – Fused – 15 Amps
• Centrifuge Motor – 1/30 H.P. DC
• Speed – 3,400 RPM max
• Force – 1,600 xg max
• Rotor Radius – 5 in. (11 cm)
• Warranty - 2 years (lifetime on rotor)