Description
Meet the DASH Apex 6 by Drucker Diagnostics, a new cost-effective centrifuge that can cut your STAT turnaround time in half. With an innovative and patented design, the Apex 6 provides quality plasma samples in minutes. Now lab results can be analyzed and returned to doctors in record time. The Apex 6 is small and nimble. An array can fit on any tabletop area, including your accessioning station, so plasma tubes can be spun right after they received. No queuing necessary. Just drop tubes in and spin.
Features
- Choose from 3 default presets for common STAT cycles
- Set and lock to a single setting, or customize in the lab
- LED lid lighting indicates cycle status
- Capacity – Up to six (6) tubes
- Tube Sizes – 3 mL to 10 mL: up to 17 mm x 75 – 100 mm
- Electronic Timer – 3 easily selectable preset cycles (default or custom)
- Brushless DC Motor – Years of operation with no routine maintenance
- 2-Stage Horizontal Rotor – Drucker Diagnostics’ patented swing-out horizontal rotor design produces ideal horizontally separated samples
- Cool Operation – Unique design of the convection based cooling system protects the samples even under the heaviest workloads
- Automatic Lid Lock – Centrifuge will not run with the lid open and the lid cannot be opened while samples are spinning
- Positive Lid Latching – Firm mechanical latching of the lid prevents the escape of debris
- Clear Shatter Proof Lid – Allows for safe sample observation and optical calibrations
- Reinforced Guard Bowl – Provides maximum safety and durability
- Regulatory Approvals – Certified to US, Canadian, and European Safety regulations and standards
Specifications
- Height – 8 in. (20 cm)
- Width – 11 in. (28 cm)
- Depth – 13.5 in. (34 cm)
- Weight – 12 lbs. (5.4 kg)
- Capacity - 6 x 75-100 mm (3-10 mL)
- Max. Acceleration Time – 20 Seconds
- Max. Deceleration Time – 20 Seconds
- Factory Setting Range – 1 to 30 Minutes (± 1%)
- Voltage – 95 to 253 VAC
- Frequency – 50/60 Hz
- Max. Power Requirements – 220 Watts
- Centrifuge Motor – 1/2 H.P. Brushless DC
- Warranty - 2 years (lifetime on rotor)
Specifications
US
Drucker Diagnostics
Three Preset Speeds and Times
12 x 14 x 9 in (30 x 36 x 23 cm)
4000 xg
5300 rpm
Horizontal
6x75-100mm/10 mL
95-253 VAC
12 lbs (5.4 kg)