The HORIZON 12 routine centrifuge simplifies processing of 75-100 mm (3-10 mL) blood and urine tubes to deliver the best outcome for your patients. Choose from one of three (3) preset cycles, or set and lock to one cycle to prevent accidental changes. The LED lid lighting prevents forgotten tubes and indicates the status of your samples: off when ready, on when running, and flashing when done. Enjoy the HORIZON 12’s quiet operation, years of maintenance-free operation, and unbeatable efficiency.

Features

• 3 cycles preset for routine lab needs
• Set and lock controls to one setting
• LED lid lighting indicates cycle status
• Capacity – Up to twelve (12) tubes
• Tube Sizes – Up to 75-100 mm (3-10 mL)
• Factory Presets – Three (3) easily selectable preset cycles (default or custom) based on CLSI guidelines and tube manufacturer IFU
• Set and Lock Controls – Select a preset cycle, or lock to a single cycle with the two-button interface
• Intuitive Lid Lighting – Lid lights flash at the end of each cycle and continue flashing until the lid is opened
• Automatic Lid Lock – Centrifuge will not run with the lid open and the lid cannot be opened while samples are spinning
• 2-Stage Horizontal Rotor – Drucker Diagnostics’ patented swing-out horizontal rotor design produces ideal horizontally separated samples
• Cool Operation – Unique design of the convection based cooling system protects the samples even under the heaviest workloads
• Clear Shatter Proof Lid – Allows for safe sample observation and optical calibrations
• Brushless DC Motor – Years of operation with no routine maintenance
• Reinforced Guard Bowl – Provides maximum safety and durability
• Quiet Operation – Enjoy a sound level of just 56 dBA
• Regulatory Approvals – Certified to US, Canadian, and European Safety regulations and standards

Specifications

• Height – 9 in. (23 cm)
• Width – 13 in. (33 cm)
• Depth – 15 in. (38 cm)
• Weight – 30 lbs. (13.7 kg)
• Capacity - 12 x 75-100 mm (3-10 mL)
• Sound Level – 56 dBA
• Max. Acceleration Time – 20 Seconds
• Max. Deceleration Time – 20 Seconds
• Factory Setting Range – 1 to 30 Minutes (± 1%)
• Voltage – 95 to 253 VAC
• Frequency – 50/60 Hz
• Max. Power Requirements – 220 Watts
• Centrifuge Motor – 1/2 H.P. Brushless DC
• Max Speed – 3,700 RPM
• Preset Speeds
  • 3,500 RPM with Chemistry Preset Cycle
  • 3,200 RPM with Coag – PPP Preset Cycle
  • 1,800 RPM with Urine Preset Cycle
• Warranty - 2 years (lifetime on rotor)