The M9D autoclave couldn’t be easier and is time tested for reliability. You simply load it set it and forget it. Select your cycle and the time is set for you. Press Start and the M9D fills with the correct amount of water. Once the sterilization process is complete, simply open the door to dissipate the steam and allow the instruments to dry.

Features

• 9" x 15" Chamber
• Steam Flush Pressure Pulse Air Removal System ensures proper steam penetration
• Self Program Controls enable you to create different cycle parameters to meet specific instrument processing needs
• Pre-programmed Controls for convenience
• Easy to read LCD Display
• One year warranty (parts and labour)

Specifications

• Overall length w/plug: 20.4" (51.8 cm)
• Overall width: 15.3" (38.9 cm)
• Overall height w/printer: 15.8" (40.1 cm)
• Minimum Countertop area: 15.3" x 17.9" (38.9 cm x 45.4 cm)
• Chamber:
  • 9" diameter (22.9 cm)
  • 15" depth (38.1 cm)
  • 3.5 gal. usable volume (13.4 liters)
• Trays:
  • Two large 7.3"
  • W x 12" L x .8" D (18.6 cm x 30.5 cm x 2.2 cm)
  • Two small 5.6" W x 12" L x .8" D (14.3 cm x 30.5 cm x 2.2 cm)
  • Unit weight: 73 lbs. (33.1 kg)
  • Water reservoir capacity: 1.1 gal. (4.1 liters)
• Electrical Requirements:
  • 115 VAC, 50/60 Hz, 15 Amps Single Phase
  • 115 VAC has 1425 watt tubular immersion heater
• A separate (dedicated) circuit is recommended for this sterilizer