0 CAD 0.00
items in your cartto quote Checkout
Ooops no items were found.
Try something else.
Ok
Loading…

Ovulation Test Kits - 6 Tests per box

Ovulation Test Kits - 6 Tests per box = 501-2013

Ovulation Test Kits - 6 Tests per box

1 In Stock
Item Code: 501-2013
Manufacturer Surgo Surgical Supply
Manufacturer Ref 4220-13

Description

A qualitative immunoassay that detects elevated levels of Luteinizing Hormone (LH), in urine samples. Simply dip and read. Six test per box.

Product Details

SPECIMEN COLLECTION
Choose a convenient time to collect your urine. This should be done at about the same time each day of testing. You will need 5-7 minutes to perform the test. DO NOT USE THE FIRST URINE IN THE MORNING. Perform the test within one hour of collecting the urine. Collect urine sample in a dry, clean container. The container must be free of detergent.

TEST PROCEDURE:

  1. Tear open sealed pouch, remove test strip. Leave the moisture absorbent packet in the pouch. (You do not need this packet for doing the test.)
  2. Hold green end of test strip, dip strip into urine up to the MAX line with the arrow end pointing down. Do not dip pass the MAX (maximum) line. Test strip in urine sample
  3. Hold for 2-3 seconds. Remove strip from urine sample and then lay it flat on a clean, dry, non-absorbent surface.
  4. Wait 5 minutes before reading result. Do not read results after 10 minutes.

INTERPRETATION OF RESULTS
While you are waiting for the your results, you may observe one band appearing first. You must wait for the full 5 minutes to see if other band will appear. After 5 minutes, you should see a colour band appear near the upper end (where you hold the strip) of the strip. If no band appears here, the test did not work properly. Do not read results, discard the test and repeat with a fresh test unit. Positive: If two colour bands are visible, and the lower band is darker than the upper band, you will probably ovulate in the next 24- 48 hours. Negative: If you see that the lower band is lighter than the upper band or only the upper band is visible, no LH surge has been detected.

EXPECTED RESULTS
A positive result indicates your urine contains a high level of LH. You can assume you will ovulate in the next 24- 48 hours and plan accordingly. The 3 days before through to 3 days after ovulation is the most fertile time of your cycle when you have the best chance of conceiving. A negative result indicates no LH surge is detected in your urine. You should continue performing the test daily.

PERFQRMANCE CHARACTERISTICS
Sensitivity arid Specificity The Biostrip LH Ovulation Prediction Test has been designed to produce a definitive color band at test region when tested with 35 mlU/ml or higher of hLH (WHO 2nd IS for human luteinizing hormone) at room temperature.

Specifications

Made In

CA

Catalog Page Number

143

Brand

Surgo Surgical Supply

Category

Pregnancy Tests & Fertility Products

Starting from
CAD 32.09 / BX
/
6
LIST PRICE CAD 37.19
14%
- +
Compare

Ovulation Test Kits - 6 Tests per box

Ovulation Test Kits - 6 Tests per box = 501-2013

Ovulation Test Kits - 6 Tests per box

1 In Stock
Item Code: 501-2013
Manufacturer Surgo Surgical Supply
Manufacturer Ref 4220-13
Starting from
CAD 32.09 / BX
/
6
LIST PRICE CAD 37.19
14%
- +
Compare

Description

A qualitative immunoassay that detects elevated levels of Luteinizing Hormone (LH), in urine samples. Simply dip and read. Six test per box.

Product Details

SPECIMEN COLLECTION
Choose a convenient time to collect your urine. This should be done at about the same time each day of testing. You will need 5-7 minutes to perform the test. DO NOT USE THE FIRST URINE IN THE MORNING. Perform the test within one hour of collecting the urine. Collect urine sample in a dry, clean container. The container must be free of detergent.

TEST PROCEDURE:

  1. Tear open sealed pouch, remove test strip. Leave the moisture absorbent packet in the pouch. (You do not need this packet for doing the test.)
  2. Hold green end of test strip, dip strip into urine up to the MAX line with the arrow end pointing down. Do not dip pass the MAX (maximum) line. Test strip in urine sample
  3. Hold for 2-3 seconds. Remove strip from urine sample and then lay it flat on a clean, dry, non-absorbent surface.
  4. Wait 5 minutes before reading result. Do not read results after 10 minutes.

INTERPRETATION OF RESULTS
While you are waiting for the your results, you may observe one band appearing first. You must wait for the full 5 minutes to see if other band will appear. After 5 minutes, you should see a colour band appear near the upper end (where you hold the strip) of the strip. If no band appears here, the test did not work properly. Do not read results, discard the test and repeat with a fresh test unit. Positive: If two colour bands are visible, and the lower band is darker than the upper band, you will probably ovulate in the next 24- 48 hours. Negative: If you see that the lower band is lighter than the upper band or only the upper band is visible, no LH surge has been detected.

EXPECTED RESULTS
A positive result indicates your urine contains a high level of LH. You can assume you will ovulate in the next 24- 48 hours and plan accordingly. The 3 days before through to 3 days after ovulation is the most fertile time of your cycle when you have the best chance of conceiving. A negative result indicates no LH surge is detected in your urine. You should continue performing the test daily.

PERFQRMANCE CHARACTERISTICS
Sensitivity arid Specificity The Biostrip LH Ovulation Prediction Test has been designed to produce a definitive color band at test region when tested with 35 mlU/ml or higher of hLH (WHO 2nd IS for human luteinizing hormone) at room temperature.

Specifications

Made In

CA

Catalog Page Number

143

Brand

Surgo Surgical Supply

Category

Pregnancy Tests & Fertility Products

SEARCH ×